The Universal Grip Company
The Universal Grip Company
  • 256
  • 213 265
  • 0
  • Εγγράφηκε στις 6 Ιούν 2015
www.universalgripco.com
The Universal Grip Company is the leading distributor of grips and fixtures for universal testing machines in the USA. UGC is also the official distributor of Galdabini's line of electro-mechanical Quasar Universal Testing Machines and Impact Testers. This equipment is used to perform ASTM and ISO standardized mechanical testing on a large variety of materials including plastics and metals.

Βίντεο
20kN Moving Body Mechanical Wedge Grips
20kN Moving Body Mechanical Wedge Grips
Πριν μήνα
The 20kN Moving Body Wedge Grips are used for tensile testing on hard plastic and soft metals like Aluminum. These wedge grips are called moving body ...
ASTM F1342 Puncture Fixture for Protective Clothing
ASTM F1342 Puncture Fixture for Protective Clothing
Πριν μήνα
The ASTM F1342 Puncture Fixture is used for puncture testing of protective clothing. A sharp needle is used to push down through the sample. The sample ...
Steel Gauge Blocks for CMM Testing Machines
Steel Gauge Blocks for CMM Testing Machines
Πριν μήνα
These steel gauge blocks were made custom according to the customer's exact dimensions. The gauge blocks are accurate to 0.005mm. They can be used to ...
100kN Steel Compression Table with T-slot Rails
100kN Steel Compression Table with T-slot Rails
Πριν μήνα
The 100kN Compression Table is used for mounting custom fixturing to a testing frame. The T-slot rails can accept T-nuts which can mount any sort of custom ...
ASTM D6241 Puncture Fixture for Geotextiles
ASTM D6241 Puncture Fixture for Geotextiles
Πριν μήνα
The ASTM D6241 Puncture Fixture is used for testing geotextiles on a universal testing machine. This test is also commonly referred to as the California Bearing ...
ASTM D395 Method A Fixture for Compression Set Testing
ASTM D395 Method A Fixture for Compression Set Testing
Πριν μήνα
The ASTM D395 Method A Fixture is used for Compression testing on rubber and elastomer. The sample is circular and placed between the compression plates.
ASTM E290 3 Point Bend Fixture for Steel Testing
ASTM E290 3 Point Bend Fixture for Steel Testing
Πριν μήνα
The ASTM E290 bend fixture is built according to Fig.3 and is used for 180 degree bending on steel samples. The fixture can be used on any Universal Testing ...
200kN Wrap Grips for Heavy Duty Strap Tensile Testing
200kN Wrap Grips for Heavy Duty Strap Tensile Testing
Πριν μήνα
The 200kN Wrap Grips have a special vise grip which is in the center of the split drum. The strap sample can be secured in the vise grip before wrapping it ...
2kN Large Pincer Grips
2kN Large Pincer Grips
Πριν μήνα
The 2kN Large Pincer Grips are used for tensile testing on a universal testing machine. These grips use a vise screw to tighten the who sides together.
10kN Pneumatic Wedge Grips on Nickel Alloy
10kN Pneumatic Wedge Grips on Nickel Alloy
Πριν 3 μήνες
Here we are tensile testing a Nickel Alloy sample using our 10kN Pneumatic Wedge Grips with Serrated Jaws. Sandpaper was inserted between the sample and ...
Sample Molding Trays for Casting ASTM Specimen Sheets
Sample Molding Trays for Casting ASTM Specimen Sheets
Πριν 7 μήνες
The Sample Molding Trays are used to create thin sheets of Polymer in a lab. The freshly mixed polymer is poured onto the tray. The tray is then usually put ...
100N 1 inch wide Eccentric Roller Grips
100N 1 inch wide Eccentric Roller Grips
Πριν 7 μήνες
The 100N 1 inch wide Eccentric Roller Grips are the perfect option for testing small samples with high elongation. The cam and drum allows the grip to ...
ASTM D2344 Short-Beam Strength Bend Fixture
ASTM D2344 Short-Beam Strength Bend Fixture
Πριν 7 μήνες
The ASTM D2344 Short Beam Strength fixture is used to test the curved beam specimens. The sample is rested across the two rolling tables and bent with a ...
2,000 lb. Manual Tensile Tester with Load Gauge
2,000 lb. Manual Tensile Tester with Load Gauge
Πριν 7 μήνες
The 2000 lb. Or 10kN Manual Tensile Tester can be equipped with either an analog or Digital Load Gauge. The gauges are calibrated with the analog gauge ...
100kN Pneumatic over Hydraulic Press
100kN Pneumatic over Hydraulic Press
Πριν 8 μήνες
The 100kN Pneumatic over Hydraulic Press is the perfect solution for cutting ASTM samples in a small lab. The system uses a simple compressor to push ...
ASTM D198 - 4 pt. Bend Test Fixture for Wood in Structural Sizes
ASTM D198 - 4 pt. Bend Test Fixture for Wood in Structural Sizes
Πριν 9 μήνες
ASTM D198 covers several static test methods for Wood. This is the most common test method for testing 2 x 4s and planks used for construction. This fixture is ...
Full Range of Cutting Dies for Rubber, Plastic, and Metal
Full Range of Cutting Dies for Rubber, Plastic, and Metal
Πριν 9 μήνες
Universal Grip offers a full range of Cutting Die options for preparing ASTM and ISO samples. The dies are selected based exactly on the sample material type ...
Universal Video Extensometer software demo
Universal Video Extensometer software demo
Πριν 9 μήνες
The Universal Video Extensometer can be used with any tensile testing machine to measure strain and elongation. It is easy to use and set up with virtually any ...
Heavy Steel Cutting Die for preparing Metal ASTM/ISO specimens
Heavy Steel Cutting Die for preparing Metal ASTM/ISO specimens
Πριν 9 μήνες
The Heavy Steel Cutting Die is used inside a press to stamp metal dog bone specimens. These coupons are used for tensile testing on a universal testing ...
ASTM B406 Transverse Rupture Fixture
ASTM B406 Transverse Rupture Fixture
Πριν 9 μήνες
The ASTM Transverse Rupture Fixture is used to test Cemented Carbides. This material is used for diamond tools for cutting and milling metal stock. Tungsten ...
ASTM D4501 Block Shear Fixture
ASTM D4501 Block Shear Fixture
Πριν 10 μήνες
The ASTM D4501 Block Shear Fixture is used to test adhesive binds. A one by one inch sample is most common and is glued to the substrate backing.
22,000 lb. Mechanical Wedge Grips
22,000 lb. Mechanical Wedge Grips
Πριν 11 μήνες
The 100kN or 22000 lb. Wedge grips are manually operated via a crank. The crank allows the user to tighten the jaws down on the sample to create up to a ...
Arbor Press Options for Cutting ASTM and ISO specimens
Arbor Press Options for Cutting ASTM and ISO specimens
Πριν χρόνο
Universal Grip carries a full line of press options for cutting tensile testing specimens according to ASTM and ISO standards. In this video we feature our 8kN and ...
VDA 238-100 Bend Test on a Galdabini Universal Testing Machine
VDA 238-100 Bend Test on a Galdabini Universal Testing Machine
Πριν χρόνο
The VDA 238-100 standard is used for flexure testing on sheet metal specimens. A universal testing machine is the ideal tool for testing to this standard.
VDA 238-100 Bend Fixture for Sheet Metal Testing
VDA 238-100 Bend Fixture for Sheet Metal Testing
Πριν χρόνο
The VDA 238-100 3 point Bend Fixture is specifically designed to match the standard. A sheet metal sample is placed between the two rollers. The 3rd point ...
Hydraulic Vise Grips for Tensile Testing on 65 HRC Steel
Hydraulic Vise Grips for Tensile Testing on 65 HRC Steel
Πριν χρόνο
Tensile Testing of hardened steel samples requires hydraulic vise grips. Mechanical wedge grips will only work for soft metals such as aluminum and copper.
Extension Rod Adapters for Environmental Chamber Tensile Test
Extension Rod Adapters for Environmental Chamber Tensile Test
Πριν χρόνο
The Extension Rod adapters are used for tensile and compression testing on a Universal Testing Machine at high or low temperatures. The adapters are custom ...
ASTM D4032 Fabric Stiffness on a Universal Testing Machine
ASTM D4032 Fabric Stiffness on a Universal Testing Machine
Πριν χρόνο
The ASTM D4032 fixture is used to test the stiffness of fabrics. The test procedure is similar to that of a puncture test. The plunger pushes the sample down and ...
ASTM F1306 Plastic Puncture Test on a Universal Testing Machine
ASTM F1306 Plastic Puncture Test on a Universal Testing Machine
Πριν χρόνο
ASTM F1306 is used to test plastic flexible barrier films such as those that may be used in packaging. The puncture fixture attaches to the universal testing ...
ASTM A497 Shear Fixture for Cross Welded Rebar Wire
ASTM A497 Shear Fixture for Cross Welded Rebar Wire
Πριν χρόνο
The ASTM A497 is used to shear test the weld that is used to join metal and steel wire. This cross-weld technique is most commonly used in structural Rebar.
Small Bend Test Fixture with Articulating Supports
Small Bend Test Fixture with Articulating Supports
Πριν χρόνο
The small bend fixture is available in Aluminum or Steel. The aluminum is good up to about 2.5kN or 500 lbs. The Steel has 10kN capacity or around 2000 lbs.
SHEET METAL TENSILE TESTING
SHEET METAL TENSILE TESTING
Πριν χρόνο
Universal Grip Co's New Tooling Fixture for Sheet Metal Tensile Testing. Punch an ASTM D412 Tensile Test Specimen out of Sheet Metal to yield test tensile ...
Roller Grips Tensile Test on Universal Testing Machine
Roller Grips Tensile Test on Universal Testing Machine
Πριν χρόνο
Here we have our 5kn 'Roller Grips' Holding a standard testing sample (literature similar to ASTM D412.) Please visit our website universalgripco.com for any ...
Arbor Press (ASTM D412)
Arbor Press (ASTM D412)
Πριν χρόνο
Our Arbor Press for Tensile Test Specimen Preparation for ASTM D412 visit universalgripco.com for questions and sales.
ASTM B571 - 90 Degree Peel Test on Metallic Coatings
ASTM B571 - 90 Degree Peel Test on Metallic Coatings
Πριν χρόνο
ASTM B571 calls for several different types of tests for testing the quality of adhesion of a metallic coating. The Peel test specifies a 90 Degree Peel Fixture which ...
ASTM C273 Shear Fixture for Tensile Testing Sandwich Cores
ASTM C273 Shear Fixture for Tensile Testing Sandwich Cores
Πριν χρόνο
ASTM C273 requires pulling and shearing a sandwich core by its two facings. Each facing side is glued or bonded to the long metal plates and allowed to set for ...
How to use the ASTM C297 Fixture
How to use the ASTM C297 Fixture
Πριν χρόνο
The ASTM C297 fixture is used on a universal testing machine to tensile test sandwich cores and foam samples. The two facing sides are glued to the insert ...
3 Point Bend Fixture with Anti Roll Bar for Metal Bend Testing
3 Point Bend Fixture with Anti Roll Bar for Metal Bend Testing
Πριν χρόνο
This heavy duty 3 point bend fixture is used for bend testing on metal specimens. The Anti-Roll bar allows for extra stabilization. The span can be adjusted to ...
Motorized ASTM D1414 Fixture on a Universal Testing Machine
Motorized ASTM D1414 Fixture on a Universal Testing Machine
Πριν χρόνο
The Motorized ASTM D1414 fixture is used to test the tensile strength of O-rings and rubber bands. The fixture has a small motor which slowly rotates the ...
3 point Bend Test on a Galdabini Universal Testing Machine
3 point Bend Test on a Galdabini Universal Testing Machine
Πριν χρόνο
This 3 point bend test is performed on a piece of packaging foam to measure its ultimate bending strength. The sample is tested to failure which would ...
Coke vs.  Pepsi - Can Compression Strength Test
Coke vs. Pepsi - Can Compression Strength Test
Πριν χρόνο
Measuring the compression strength and structural integrity of a soda can is a critical quality control measure for soda bottlers. Here a Galdabini Universal ...
Quick Overview of the Galdabini 2.5kN Universal Testing Machine
Quick Overview of the Galdabini 2.5kN Universal Testing Machine
Πριν χρόνο
The Galdabini Universal Testing Machine can be used for a wide variety of material testing procedures. By changing the grips, different tests can be performed.
300kN Threaded Bolt Grips for Tensile Testing
300kN Threaded Bolt Grips for Tensile Testing
Πριν χρόνο
The 300kN Threaded Bolt Grips are used for tensile tests on metal and steel. Popular ASTM tests that use these grips include ASTM A370 and ASTM E8.
How to Use a Galdabini Pendulum Impact Tester
How to Use a Galdabini Pendulum Impact Tester
Πριν χρόνο
The Galdabini Impact Tester can be used for both Charpy and Izod impact testing. This machine features a pendulum which swings down to impact and break ...
Automatic Sample Marking Tool for Video Extensometers
Automatic Sample Marking Tool for Video Extensometers
Πριν χρόνο
The automatic sample marking tool is a small motorized machine used for ASTM specimen sample preparation. The machine deposits a small piece of tape onto ...
17kN Pneumatic Press with Safety Switches
17kN Pneumatic Press with Safety Switches
Πριν χρόνο
The 17kN Pneumatic Press is used to cut ASTM, ISO, DIN, EN, and JIS sample specimens. This press includes our dual safety switches which requires the ...
5kN Extra Wide (4") Vise Grips for Tensile Testing
5kN Extra Wide (4") Vise Grips for Tensile Testing
Πριν χρόνο
The 5kN or ~1100 lb. Extra Wide Vise Grips are used to tensile test samples with up to 100mm thickness. The grip jaws slide along an embedded rail which ...
Universal Cardan Joint Adapters for Tensile Testing
Universal Cardan Joint Adapters for Tensile Testing
Πριν χρόνο
The universal joint adapter or cardan joint adapter can swivel with two degrees of freedom. This swivel action allows a connected grip to perfectly align along the ...
ASTM D5379 Iosipescu V-Notch Shear Fixture
ASTM D5379 Iosipescu V-Notch Shear Fixture
Πριν χρόνο
ASTM D5379 requires the use of a specially designed V-Notch Shear Fixture. The Iosipescu shear fixture has two main pieces, the base and the top plunger.